|
|
|
|---|
 Elecro Satellite Stainless Steel 1Kw Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
|
Elecro Satellite Stainless Steel 1KW Aquatic Heater
|
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
1 kw |
| Voltage: |
230V |
| Amperage: |
5 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS1KW | Elecro Satellite Stainless Steel 1 Kw Aquatic Heater | £385.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 2Kw Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
| Elecro Satellite Stainless Steel 2KW Aquatic Heater |
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
2 kw |
| Voltage: |
230V |
| Amperage: |
9 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS2KW | Elecro Satellite Stainless Steel 2 Kw Aquatic Heater | £409.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 3Kw Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
|
Elecro Satellite Stainless Steel 3Kw Aquatic Heater
|
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
3 kw |
| Voltage: |
230V |
| Amperage: |
13 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS3KW | Elecro Satellite Stainless Steel 3 Kw Aquatic Heater | £425.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 4Kw Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
| Elecro Satellite Stainless Steel 4Kw Aquatic Heater |
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
4 kw |
| Voltage: |
230V |
| Amperage: |
18 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS4KW | Elecro Satellite Stainless Steel 4 Kw Aquatic Heater | £445.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 6Kw Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
| Elecro Satellite Stainless Steel 6Kw Aquatic Heater |
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
6 kw |
| Voltage: |
230V |
| Amperage: |
26 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS6KW | Elecro Satellite Stainless Steel 6 Kw Aquatic Heater | £469.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 6Kw 3-Phase Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
| Elecro Satellite Stainless Steel 6Kw 3-Phase Aquatic Heater |
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
6 kw |
| Voltage: |
400V |
| Amperage: |
9 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS6KW3 | Elecro Satellite Stainless Steel 6 Kw 3-Phase Aquatic Heater | £539.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 8Kw Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
| Elecro Satellite Stainless Steel 8Kw Aquatic Heater |
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
8 kw |
| Voltage: |
230V |
| Amperage: |
35 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS8KW | Elecro Satellite Stainless Steel 8 Kw Aquatic Heater | £489.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite Stainless Steel 8Kw 3-Phase Aquatic Heater
This New Digital Satellite heater has been designed specifically for installation where the heater must be inaccessibly sited, allowing for full monitoring and control of the heater from a remote location which can be up to 5 metres away from the actual heater.
These new satellite heaters come complete with the new Elecro Pond Smart controller which affords the user numerous functions and total control over the temperature of the water. With full diagnostic display, high/low temperature settings and a full timer the controller can be configured to optimize the best use of your electrical tarrifs resulting in optimum economy for heating the pond or pool.
The Heater controller circuit includes a highly sensitive flow switch that requires only 1,000 litres per hour of flow, contactor, high limiting 55°C safety thermostat (manual reset) and a powerful CPU driven digital thermostat.
In addition the controller affords you the facility to be able to increase or decrease the water temperature over a given period i.e. 1°C over a 24 hour period, which as we all know is the best way to alter water temperature without excerting to much stress on our fish.
The Satellite Stainless Steel Aquatic heater has been designed especially for the fish and Koi market place. It offers all season temperature control for professional fish keepers, breeders and hobbyists alike.
Featuring digital control and new ultra-efficient super long life heating elements these are an excellent choice and should provide years of service.
Designed for safety and easy of installation, all heaters come fitted with 1-1/2" BSP female threaded adaptors for ease of connection.
The construction of these heaters is unsurpassed with the main body being constructed of Stainless Steel to BS316 standards and the heating elements although constructed mainly in Stainless Steel are reinforced with TiTANIUM.
Product Features:
- Pure Stainless Steel Flow Tube
- TiTANIUM Reinforced Stainless Steel Elements
- Digital Temperature Control & Display
- Accurate Temperature Control to 0.5°C
- User Defined Incremental Temperature Increasing/Decreasing
- Visual No-Flow Alarm
- Submersible Temperature Sensing Probe
- External Reversible Flow Control Switch
- New High Temperature Limiting Thermostat
- Integral Contactor Relay
- Circuit Protection Delay Switching
| Elecro Satellite Stainless Steel 8Kw 3-Phase Aquatic Heater |
| Main Tank: |
Stainless Steel BS316 |
| Heating Elements: |
Stainless Steel Reinforced with TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
8 kw |
| Voltage: |
400V |
| Amperage: |
13 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATS8KW3 | Elecro Satellite Stainless Steel 8 Kw 3-Phase Aquatic Heater | £559.00 | Add to Cart |
| |
|
|---|
 Elecro Satellite TiTANIUM 2KW Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 2KW Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
2 kw |
| Voltage: |
230V |
| Amperage: |
9 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT2KW | Elecro Satellite TiTANIUM 2 Kw Aquatic Heater | £465.00 | Add to Cart |
|
|
|---|
 Elecro Satellite TiTANIUM 3Kw Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 3KW Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
3 kw |
| Voltage: |
230V |
| Amperage: |
13 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT3KW | Elecro Satellite TiTANIUM 3 Kw Aquatic Heater | £479.00 | Add to Cart |
|
|
|---|
 Elecro Satellite TiTANIUM 4Kw Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 4KW Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
4 kw |
| Voltage: |
230V |
| Amperage: |
18 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT4KW | Elecro Satellite TiTANIUM 4 Kw Aquatic Heater | £499.00 | Add to Cart |
|
|
|---|
 Elecro Satellite TiTANIUM 6Kw Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 6KW Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
6 kw |
| Voltage: |
230V |
| Amperage: |
26 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT6KW | Elecro Satellite TiTANIUM 6 Kw Aquatic Heater | £529.00 | Add to Cart |
|
|
|---|
 Elecro Satellite TiTANIUM 6Kw 3-Phase Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 6KW 3-Phase Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
8 kw |
| Voltage: |
400V |
| Amperage: |
9 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT6KW3 | Elecro Satellite TiTANIUM 6 Kw 3-Phase Aquatic Heater | £619.00 | Add to Cart |
|
|
|---|
 Elecro Satellite TiTANIUM 8Kw Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 8KW Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
8 kw |
| Voltage: |
230V |
| Amperage: |
35 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT8KW | Elecro Satellite TiTANIUM 8 Kw Aquatic Heater | £549.00 | Add to Cart |
|
|
|---|
 Elecro Satellite TiTANIUM 8Kw 3-Phase Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on All Aquatic Systems, including salt water / tropical marine.The decision to produce a Titanium heater was made for a number of reasons.
With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. Therefore, this new heater is also suitable for heating acids and virtually any other liquid.
Product Features:
- Pure TiTANIUM Flow Tube
- Pure TiTANIUM Element(s)
- Digital Temperature Display & Control
- External Reversible Flow Switch
- New High Limiting Safety Thermostat
- Integral Contactor / Relay
- Curcuit Protection Delay Switching
As with the Stainless Steel models all units come fully equiped with Digital control for the precise all season contol demanded by professional fish keepers, breeders and hobbyists. The highly sensitive flow switch, high limiting safety thermostat and integral contactor / relay are fiitted as standard, an optional 24 hour time clock is also available. The TiTANIUM heaters are designed for safety and efficience, they are as easy to install as the stainless steel model, with the option of water flow from either direction.
|
Elecro Satellite TiTANIUM 8KW 3-Phase Aquatic Heater
|
| Main Tank: |
Pure TiTANIUM |
| Heating Elements: |
Pure TiTANIUM |
| Digital Control Thermostat: |
Displays & Controls Temperature with 0.5°C |
| High Limiting Safety Thermostat: |
55°C Manual Reset |
| Minimum Flow Requirements: |
1,000 litres per hour |
| Maximum Flow Velocity: |
10,000 litres per hour |
| Power Output: |
8 kw |
| Voltage: |
400V |
| Amperage: |
13 Amps |
|
| Item # | Description | Price | Add to Cart |
|---|
| ESATT8KW3 | Elecro Satellite TiTANIUM 8 Kw 3-Phase Aquatic Heater | £639.00 | Add to Cart |
|
|
Elecro Satellite TiT... |
|---|
Elecro Satellite TiTANIUM 3Kw Digital Aquatic Heater
The Elecro Satellite TiTANIUM Aquatic Heater is the latest addition to our growi...
|
Read more »»»
£479.00 (Buy Now)
|
FilterTech Digi-Stat... |
|---|
Designed to give automatic temperature control for Koi ponds. Operating in the range of 5 to 30 degrees Celcius this highly accurate stat wi...
|
Read more »»»
£99.95 (Buy Now)
|
170000 BTU Heat Exch... |
|---|
Heat Exchangers are the most cost effective method of controlling the water temperature of Ponds. Using a Heat Exchanger provides a method o...
|
Read more »»»
£185.00 (Buy Now)
|
Elecro 700 EVO TiTAN... |
|---|
Elecro 700 EVO TiTANIUM 2KW Analogue Aquatic Heater
The Elecro TiTANIUM Aquatic Heater is the latest addition to our growing pro...
|
Read more »»»
£285.00 (Buy Now)
|
Contact Information
|
Gorse Hill Bungalow
Gorse Hill Lane
Wellingore
Lincolnshire LN5 0BY
United Kingdom
|
| Phone: |
+44 (0) 1522 811330 |
| Fax: |
+ 44 1522 811330 |
| Mon-Fri: |
By Appt. |
| Saturday: |
by Appt. |
| Sunday: |
by appt. |
|
