Hi Blow Air Pumps (HP80 Series)
The Hi Blow HP80 Air Pump is one of a full range of linear diaphragm pumps providing solutions to meet a broad range of requirements in Medical, Industrial, Environmental and Consumer applications. Whenever your requirements call for a pump providing clean oil-less air, extremely quiet operation, long life, low power consumption, low vibration, and a low starting current, then HIBLOW pumps may be the solution you are looking for.
- Quiet Operation
- Low Power Consumption
- Oil-Less, Contamination Free Exhaust
- Long Life Expectancy
- U.L Outdoor Rating
- Ease of Service
- Thermal Protection
HIBLOW air pumps are the original high performance air pump, used for many years on Koi ponds and filtration systems and have proved to be totally reliable and energy efficiency. These pumps are ideal for delivering large amounts of air under pressure to multiple airstones both at depth and to your filtration systems.
We at Dankoi cannot stress enough the importance of adequate air supply to both your pond and filtration systems.
Low oxygen levels can have a serious detrimental effect on the health of your fish; very low levels can even cause death of both the fish, and nitrifying bacteria.
Important Note on Installation:
As with all Air Pumps, they should be installed above the water level. This prevents back siphoning which can result in damage to the pump. Where this is not possible, a non-return valve should be installed to protect the pump. The use of pressure release valves and or pressure gauges is highly recommended.
|Ho Blow HP80 Air Pump Specifications
||80 Litres per min
||220v / 240v
||50 Hz / 60 Hz
||36 dB / 36 dB