The EcoMax DM-8000 Pond Pump is a highly efficient, econnomically priced pond pump designed to pump water at 6500lph to a 4m head.
The EcoMax DM-8000 Pond Pump is a high energy efficient pump with innovative electronics, quiet in operation and as it contains no copper parts is suitable for both fresh and salt water applications. The DM Series range of pumps also contain a durable ceramic drive shaft which is normally only found on significantly more expensive pumps.
The EcoMax DM series pond pumps will automatically stop when no water is detected inside the rotor this not only saves on elcticity charges but also protects the pump from 'burnout'. When the impeller is blocked the pump it will go into a "lock" position in which the pump does not use power and waits until the blockage is cleared, again saving on electircity and potential damage to the pump.
The EcoMax DM series of pond pumps are a competitive priced dirty-water pump capable of pumping solids up to 6mm designed for use in water gardens, waterfalls, fountains, filters, etc.
As we all know that when running filtration systems the importance of reliability and peace of mind, with the pumps innovative electonics the EcoMax DM Range of pumps affords the purchaser this reassurance and to underpin this the entire range is backed by a 2 year manufacturers warranty.
EcoMax DM-8000 Pond Pump Product Features:
- Economical to Run
- Innovative Electonics
- Quiet in Operation
- Suitable for Dry Mount Applications
- Suitable for both Fresh and Salt Water Applications
- No Copper Parts
- Equiped with Wear Resistant Ceramic Drive Shaft
- 1-1/4" Male Thread Inlet/Outlet
- 2 Year Manufacturer Backed Warranty
The EcoMax DM range of pumps are suited to a dry application only (not submersed) and the inlet to the pump should be below the water level so that the water can gravity feed to the inlet of the pump.