Plain Reducing Bush
Use these Plain Reducing Bushes whenever there is a need to reduce down the diameter of the pipework in a run, and by the same token when there is a need to step up and increase the diameter in a run of pipework. These PVC pressure fittings are available in nine sizes for use with Class E pressure pipe.
These bushes are designed to work with all sockets in the PVC Pressure Range, these can be straight connectors, 45 degre bends, 90 degree bends etc, for example, to reduce 4" to 2" pipe simply solvent weld a 4" staight connector to your 4" pipe and then the reducing bush simply solvent welds into the other end.
Sizes Available:
- 3/4 inch to 1/2 inch
- 1 inch to 3/4 inch
- 1-1/2 inch to 3/4"
- 1-1/2 inch to 1 inch
- 2 inch to 1 inch
- 2 inch to 1-1/2 inch
- 3 inch to 1-1/2 inch
- 3 inch to 2 inch
- 4 inch to 2 inch
- 4 inch to 3 inch
Here at Dankoi we cannot stress enough the importance of doing it right the first time, these superb quality fittings for use with our range of Class E Pressure Pipe is probably the best available. The cost of these have dramtically reduced in recent times making them affordable. Don't settle for anything less than the best!!!.
For help with your pipework and fittings requirements please contact us on 01522-811330 or alternatively e-mail us at info@dankoi.com.
|